Группа в Фейсбук Группа ВКонтакте

Диагностика подвески бесплатноПромывка радиатора и заправка кондиционера

P2147 Fuel Injector Group «A» Supply Voltage Circuit Low

General Description

 

Injectors spray fuel in the highly compressed combustion chamber, and power generates through combustion process. Fuel pressure is raised to 1600bar in common rail diesel engine for the purpose of making fuel into minute particles. And fuel devided into minute particles leads smoke reduction, high power generation, and improved fuel efficiency.
Needle valve inside of injector is located between A and B chamber. If applied pressure to B chamber is relived by injector solenoid, niddle valve is raised by the pressure of A chamber then, fuel is injected. If same pressure is applied to A and B chamber, niddle valve closes by the elastic force of spring then, fuel injection stops.
As electronically controlled injector is applied instead of mechanical injector, it becomes possible to control pilot and post injection, injeciton duration and quantity independantly. Therefore engine performance is improved by these control. For more precise correction of fuel injection quantity, inputting C2I data to ECM is required.
【IQA】 During the production process of injectors, it is inevitable for each injector to have different injection characteristic. To cope with the various fuel injection characteristic optimally, NO. which consists with 16 character is given to a certain injector. The composition of NO. corresponds to a certain specific fuel injection characteristic. The characteristic is arleady saved at ECM. Therefore, if the NO. on injectors is inputted to ECM using SCAN TOOL, optimum fuel injection is achieved.

 

DTC Description
P2147 is set when injector power circuit voltage is below 0.5V at IG KEY «ON». This code is due to short to ground in injector power circuit(HIGH side). (when 2.5V~2.8V is not detected at injector control circuit(LOW side) due to short to ground in injector power circuit.)
DTC Detecting Condition
Item Detecting Condition Possible Cause
Threshold Value
The voltage below 0.5V is detected in injector power circuit. (SC-)
Injector circuit
Injector component
Fail Safe
Fuel injection inhibited.
Fuel return from injector inhibited.
Engine speed is limited to 2000RPM.
Check lamp
ON

 

※ OC (Open Circuit) : Open, SC- (Short Circuit — ) : Short to ground, SC+ (Short Circuit +) : Short to battery

Авто опросы:

Какой бензин вы заливаете в свою машину?

Загрузка ... Загрузка ...

обсуждение

Когда вы обычно меняете зимнюю резину на летнюю?

Посмотреть результаты

Загрузка ... Загрузка ...

обсуждение

Обсуждения

  • Загрузка...


Посетители сайта

Мы принимаем к оплате:

Мы принимаем к оплате Visa и Master Card


Обратная связь


Поиск по сайту




Консультации

Хендай Туссон 2008 г.в....

Здравствуйте, подскажите код краски бампера и кузова. VIN KMHJM81BP9U003801[...]

Хендай Туксон 2017 г.в. 2.0 ав...

Здравствуйте,возможна ли замена штатной автомагнитолы ACB10D7EE на штатную магнитолу LAN5020EHTL , я[...]

Kia ceed sw 2008г....

Kia ceed sw 2008г. На диагностике подвеске нашли: порван пыльник шаровой, отслоение продольных и кор[...]

киа Рио 2010 1,4 МТ...

подскажите код краски по VIN: KNADH411AB6754569[...]

Hyundai i40 2016 года 2.0 (150...

Здравствуйте, подскажите замена переднего левого ступичного подшипника, сколько будет стоить. И есть[...]

Кия Рио 2018 года. Цвет белый....

Z94C241BBKR095078 нужен код краски[...]

Киа рио 2006 года 1.6 механика...

Подскажите номер краски knede241266171228[...]

Цвет по VIN...

Здравствуйте. Определите, пожалуйста, цвет краски по номеру. VIN KNADH411AA6625845[...]

. Яндекс.Метрика Top.Mail.Ru